Thank you to a number of you replying with helpful suggestions as to what my
problem might be.
So far, I have proven that my radio is responding properly by grounding the
FSK input to ground. The tone shifts when grounded.
It looks now that either the transistor in the interface cable is bad or the
computer Com1 port is not working properly, which I doubt.
I will take a look at the transistor tomorrow and let you know what I find.
Again, thank you to Don/AA5AU, Ed/K4SB and Mac/N0OB for your suggestions.
All helpful.
73 - Bob
WA2MNO
-----Original Message-----
From: Don Hill AA5AU [mailto:aa5au@bellsouth.net]
Sent: Saturday, March 31, 2007 9:45 PM
To: 'Bob Lafont'
Subject: RE: [WriteLog] Steady Carrier, No Diddle
Something must be amiss. In the MMTTY plug-in for WriteLog, there is no
option in the TX tab of setup to choose the PTT (and FSK) COM port. FSK is
selected from the Port menu of Rttyrite.
73, Don AA5AU
http://www.aa5au.com
http://www.rttycontesting.com
-----Original Message-----
From: Bob Lafont [mailto:bob.lafont@gmail.com]
Sent: Saturday, March 31, 2007 8:56 PM
To: 'Don Hill AA5AU'
Subject: RE: [WriteLog] Steady Carrier, No Diddle
Thanks Don but unfortunately I have the MMTTY plug-in installed as well as
MMTTY full version.
Bob
-----Original Message-----
From: Don Hill AA5AU [mailto:aa5au@bellsouth.net]
Sent: Saturday, March 31, 2007 8:53 PM
To: 'Bob Lafont'
Subject: RE: [WriteLog] Steady Carrier, No Diddle
It appears you have not installed the MMTTY plug-in for WriteLog if you are
trying to run MMTTY with WriteLog. You have to install the MMTTY plug-in
for WriteLog. It is located at:
http://writelog.com/ThirdParty/MMTTYPluginforWritelog_V13.Exe
Instructions on how to install the MMTTY plug-in for WriteLog and running it
are located here:
http://www.rttycontesting.com/writelog/mmtty/plugin_page0.htm
Download the MMTTY plug-in on rttycontesting.com (there is a full PDF
version link at the top of the page).
Hope this helps.
73, Don AA5AU
http://www.aa5au.com
http://www.rttycontesting.com
-----Original Message-----
From: writelog-bounces@contesting.com
[mailto:writelog-bounces@contesting.com] On Behalf Of Bob Lafont
Sent: Saturday, March 31, 2007 4:23 PM
To: Writelog
Subject: [WriteLog] Steady Carrier, No Diddle
I looked at previous emails about 'no diddle' and thought my problem of no
diddle might have already been answered but unfortunately it hasn't.
In MMTY, under the TX tab, Diddle is set to LTRS.
Also under the TX tab PTT port is set to COM1 which is where my FSK
interface is connected to.
Under Radio Command in the TX tab I have Port Definition set to Com4 where
my CAT interface is connected to.
When I launch MMTY the CAT interface properly activate the CAT function in
my MkV.
I have tried under the Misc tab Tx Port both Sound+Com+TxD (FSK) and
COM-TxD(FSK) but neither fix the no diddle or no RTTY, just steady carrier.
Also, for sometime obvious reasons, a simple radio setting might be the
problem but the radio is set to FSK.
Any suggestions as to what else I can try?
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|