>From Writelog's Help.
WRITELOG.INI [Ports]
[Ports]
The settings from the Setup Ports dialog:
dvkport=2
dvktype=2
cwtype=3
cwport=1
AntRelayOnLpt3=YES,1
AntRelayonLPT1=YES
Comm1Used=CW,0
The COMn:= settings are used by the WriteLog Packet window and by the RTTY
window. There are separate COMn: settings in the [RIGS] section used only
for rigs.
COM1:=9800,n,8,1,
COM2:=4800,e,7,1,
There are 4 "slots" available for WriteLog rig interfacing. By default,
CommSlot1 is COM1:, but you can change that by changing the number on the
right of the equal sign. These settings are not used for RTTY or for packet
CommSlot1=1
CommSlot2=2
In this example, the third and fourth slots are on COM7 and COM8. COM15 is
as high as is supported.
CommSlot3=7
CommSlot4=8
-----Original Message-----
From: writelog-bounces@contesting.com
[mailto:writelog-bounces@contesting.com] On Behalf Of DanW
Sent: July-11-07 6:34 PM
To: writelog@contesting.com
Subject: [WriteLog] Com port availability/access
Pardon me if this has already been posted:
I have a laptop wherein com1-com3 are allocated by system stuff (modem,
etc..). No "real com ports" but USB and virtual com software allow me to
create and use com 4-8. I control my Yaesu FT-2000 on com4, cw on com 5,
RTTY on com7 and aux on com8. As I am a new Writelog user - I do not see a
way to allocate Writelog to use com 4 thru 8. Ideas, suggestion would be
greatly appreciated.
Dan KL1JP
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|