Filip,
could You forward me the rotor settings set up in Your writelog.ini,
or perhaps the whole file, so I could compare them, Yours and mine,
please ?
Yours,
Alec
-----Original Message-----
From: writelog-bounces@contesting.com
[mailto:writelog-bounces@contesting.com] On Behalf Of Filip Poverud
Sent: Monday, November 19, 2007 1:26 PM
To: writelog@contesting.com
Subject: Re: [WriteLog] AlfaSpid as YAESU Rotor
You have to set your rotor in Yaesu mode.
This is done through the controller menu, see the manual for specifications.
I have successfully used the Alfaspid AZ rotor with WL.
---
73 de LB1UE - Filip
-----Original Message-----
From: writelog-bounces@contesting.com
[mailto:writelog-bounces@contesting.com] On Behalf Of Alec Otulak
Sent: 18. november 2007 22:53
To: 'Ron K5DJ'; w5xd@writelog.com; writelog@contesting.com
Subject: [WriteLog] AlfaSpid as YAESU Rotor
Hi Guys,
how do You find possibility to add AlfaSpid to the rotator list, as the one
has become very much widely used recently.
please ?
However,
looking at what I have changed in the writelog.ini file to make AlfaSpid
pretend it is YAESU GS232B, could You tell me what is wrong that it does not
work from within Writelog, please ?
I have changed the settings within WRITELOG.INI to:
[ENTRY]
RotatorPort=5
RotatorType=YAESU
and added to
[Ports]
COM5:=1200,n,8,1
Yours,
Alec/SP2EWQ
-----Original Message-----
From: Alec Otulak [mailto:sp2ewq@wp.pl]
Sent: Sunday, November 18, 2007 5:15 PM
To: 'writelog@contesting.com'
Subject: RE: AlphaSpid as DCU-1 Rotor
Hi,
in the meantime,
I have found out that the only configurable one is YAESU type rotator.
I have checked it with Logger32,
and AlphaSpid works alright when configured as YAESU GS232B.
So, I have changed the settings within WRITELOG.INI to:
[ENTRY]
RotatorPort=5
RotatorType=YAESU
and added to
[Ports]
COM5:=1200,n,8,1
However,
I cannot make the antenna turn..
Any ideas,
please ?
Yours,
Alec/SP2EWQ
-----Original Message-----
From: Alec Otulak [mailto:sp2ewq@wp.pl]
Sent: Sunday, November 18, 2007 4:26 PM
To: 'writelog@contesting.com'
Subject: AlphaSpid as DCU-1 Rotor
Hi Guys,
thanks a lot for Your inputs re scaling QSO Entry Window font.
However, I am coming with another problem yet.
I have got AlphaSpid rotor which can be configured as DCU-1
with the only available comport speed of 1200.
On the other hand,
I have read somewhere Writelog's rotor comport speed is set up to 4800,
and it seems it is not configurable.
Has anyone reached a solution how to use AlphaSpid with Writelog,
please?
Yours,
Alec
-----Original Message-----
From: Ron NØAT [mailto:n0at@comcast.net]
Sent: Sunday, November 18, 2007 3:34 PM
To: Alec Otulak
Subject: Re: [WriteLog] Scalable 'QSO ENTRY' window
Alec,
Click on Setup, Entry Window Font
73 de Ron NØAT
----- Original Message -----
From: "Alec Otulak" <sp2ewq@wp.pl>
To: <writelog@contesting.com>
Sent: Sunday, November 18, 2007 02:16
Subject: [WriteLog] Scalable 'QSO ENTRY' window
Hi Guys,
the first thing which hit me upon installing Writelog:
how to make the QSO ENTRY window bigger
or choose a larger font in there,
please ?
Yours,
Alec/SP2EWQ
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|