I want to hookup my laptop ( TOSHIBA SATELLITE BOUGHT LAST FALL ) port.
Normally there is no serial port and there is 4 USB.
I bought a 2 USB to serial port interface box (SIIG ) adaptor.
Installation work correctly and on computer startup it switch on/off rigbalster
plus but no TX on macros...
but intallation gave port 6 and 7 when WL setup show 1 to 4 serial and Lpt 1 to
3.
in control panel I changed both to 1 and 2 restart but it does'nt see the pro3
ct-17 inteface for freqs & bands noer PTT.
I would prefer to use com 1 and 2 which seems to be available on control panel
port change but if I must use 6 or 7 OK.
How do we do that...?I seen we can address higher port number to WL setup main
page but I lost it recently.
I will use my laptop on cmming small expedition.
Can someone give an help
Gilles VE2LX
ve2lx@sympatico.ca
==============
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|