John,
I have the same problem on 3 machines. I have not been able to find the
problem. I would like to fix it. I also know it is not the LPT port doing
it. I recently switched to the rigexpert using USB and serial ports and it
still does it. That also rules out direct I/O. If you find the cure please
let us all know.
73,
Frank KL7FH
----- Original Message -----
From: "John and Mary Powell" <zl1bhq@paradise.net.nz>
To: <writelog@contesting.com>
Sent: Friday, February 01, 2008 10:17 PM
Subject: [WriteLog] BROKEN CW WITH WL10.65 AND DIRECT-IO AS LPT
DRIVER/INTERFACE
>I have recently re-installed WL, initially with v10.64 and subsequently
>upgraded to 10.65. Somewhat belatedly I discovered that these versions do
>not support LPT keying and as a result I installed Direct-IO (evaluation
>model meantime). The problem - broken CW, generally on an unintelligible
>nature. Is there someone on the Reflector who has experienced this problem
>and if so would be kind enough to suggest a cure. The re-installation has
>been made on a HPCompaq NX5000 laptop, principally for portability reasons.
> Any assistance would be appreciatively welcome.
>
> 73 and thanks in advance
> John Powell. ZL1BHQ
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|