WriteLog
[Top] [All Lists]

Re: [WriteLog] F12 Key?

To: Gary AL9A <al9a@mtaonline.net>
Subject: Re: [WriteLog] F12 Key?
From: hank k8dd <hank.kohl@gmail.com>
Date: Wed, 27 Feb 2008 21:22:16 -0500
List-post: <writelog@contesting.com">mailto:writelog@contesting.com>
I think it can .... I changed F12 to EntryChangeOperators  at PZ5WW for 
ARRL CW.

In other multi ops we press A=B, chase the spot and switch VFOs to go 
back to the run freq.

73    Hank    K8DD

Gary AL9A wrote:
> The F12 cannot be configured by the user.  WL uses this key to return the 
> rig to a previous operating frequency.
>
> For example, you are running SO1R and calling CQ on 14.155.  You notice a 
> spot come in for a new mult at 14.282   Double click on the spot to QSY the 
> rig or type in 14282 in the Call field and hit Enter to QSY.  After breaking 
> the pileup and getting the mult in the log, hit the F12 key to immediately 
> QSY back to 14.155.  This only works if you don't tune the rig's VFO 
> manually before pressing F12.  If you do tune the VFO the F12 key won't 
> return you to the previous frequency.
>
> 73,
> Gary AL9A
>
>
>
> ----- Original Message ----- 
> From: "Eric Rosenberg - W3DQ" <w3dq@arrl.net>
> To: <writelog@contesting.com>
> Sent: February 18, 2008 10:16 PM
> Subject: [WriteLog] F12 Key?
>
>
>   
>> Is it available for use? If so, how do I configure it?
>>
>> Thanks,
>>
>> Eric W3DQ
>> Washington, DC
>> _______________________________________________
>> WriteLog mailing list
>> WriteLog@contesting.com
>> http://lists.contesting.com/mailman/listinfo/writelog
>> WriteLog on the web:  http://www.writelog.com/ 
>>     
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/
>
>   

_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

<Prev in Thread] Current Thread [Next in Thread>