Hello Scot and all.
In our russian contest rules we have the following:
"if there is more than 5% of incoming and missed numbers in log, station will
be disqualificated."
In VHF contest this situation is very often, when another station needs to QSY,
for exmaple, from 144Mhz to 432Mhz.
So, it is a very big problem for us.
Many thanks for your attention. Only hope, that Wayne W5XD correct it.
15.07.08, 07:59, "Scot Herrick" <scot@k9jy.com>:
> Mike,
> This is not a bug.
> The rules state that the serial number must be copied and/or the serial
> numbers must be in order by overall log or by band.
> Nothing in the rules state that a serial number in a log must start with one
> and go sequentially by number to the end of the contest.
> WriteLog gives you a serial number with a call so you can send it. If you
> were using SO2R and had this like other logging programs, you'd have the
> possibility of sending the same "unique" serial number to two different
> stations and essentially break the rules.
> The serial numbers are unique, in order. Just not sequential.
> Hope this helps.
> Scot Herrick, K9JY
>
> -----Original Message-----
> From: writelog-bounces@contesting.com
> [mailto:writelog-bounces@contesting.com] On Behalf Of Mike RA9FTM
> Sent: Monday, July 14, 2008 8:51 PM
> To: writelog@contesting.com
> Cc: carsten.steinhoefel@web.de; w5xd@writelog.com
> Subject: [WriteLog] Fwd: bug in QSO numbering
> Sorry, but I have not received an answer... What are you rhinking about this
> one?
> -------- Forward --------
> 09.07.08, 08:36, "Mike RA9FTM" <ua9fbv-bbs@yandex.ru>:
> Oh, I am sorry...
> So, again. How to introduce this bug:
> 1. First of all, go Setup->Sort order & serial numbers, check "Separate by
> band"
> 2. enter a call in the entery window
> 3. Press ALT+F1, ALT+F2 (change band and back again)
> 4. Press CTRL+W
> 5. enter call again and you will see, that TX number is now number "2" (not
> "1")
> Hot to repair this one:
> go Contest->Recalculate score
> OR
> go Setup->Sort order & serial numbers, check "Total of all bands"
> go Setup->Sort order & serial numbers, check "Separate by band"
> This bug is not depends on module, what you will use, so it is in
> WriteLog....
> 08.07.08, 15:58, "Carsten Steinhöfel" :
> > Hi Mike,
> > Your email arrived like below. Could a problem with my Outlook of course,
> > but maybe you could resend it.
> > 73 Carsten, DL1EFD
> >
> > > -----Original Message-----
> > > From: ua9fbv-bbs@yandex.ru [mailto:ua9fbv-bbs@yandex.ru]
> > > Sent: Tuesday, July 08, 2008 1:03 PM
> > > To: W5XD
> > > Cc: Carsten Steinhofel
> > > Subject: bug in QSO numbering
> > >
> > >
>
> --
> 73! Mike RA9FTM
> -------- End --------
--
73! Mike RA9FTM
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|