> Any ideas why I can't type when I hit the TRANSMIT button in mmtty?
MMTTY is being used as a plug-in and does not have keyboard access
(you can't use F9 to "press" the TX button). Data to MMTTY in the
plug-in state must come from the controlling program (WriteLog).
Don't hit the TX button in MMTTY - use Alt-K to open the WriteLog
keyboard window, enter the text to be sent and used Alt-K to end
the text entry.
73,
... Joe, W4TV
> -----Original Message-----
> From: writelog-bounces@contesting.com
> [mailto:writelog-bounces@contesting.com] On Behalf Of Arlon Nelson
> Sent: Saturday, September 20, 2008 9:48 PM
> To: writelog@contesting.com
> Subject: [WriteLog] Keyboard
>
> I'm using Writelog 10.67B and the MMTTY engine. It works
> great with the macros that I setup in Writelog but am unable
> to use the keyboard when I manual turn on the tx in mmtty.
> Using the F keys to send macros works ok. Any ideas why I
> can't type when I hit the TRANSMIT button in mmtty?
>
>
> 73,
>
> Nels, WØTUP
> Minot, North Dakota
> anelson@min.midco.net - w0tup@arrl.net
> http://min.midco.net/ws
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|