microHAM Router does not block any data between the
radio and WriteLog. The Omni VII has two CAT modes -
one is "native" the other is a modified mode that
supports SteppIR antennas and the CT logging program.
Check to see that you have selected to the correct
protocol for WriteLog.
> -----Original Message-----
> From: writelog-bounces@contesting.com
> [mailto:writelog-bounces@contesting.com] On Behalf Of Roger Wise
> Sent: Saturday, October 11, 2008 10:41 AM
> To: WriteLog@contesting.com
> Subject: [WriteLog] no cw or mode readout
>
>
> I am running Vista. Rig is Omni VII. Writelog 10.68F.
> Microham Device Router Version 7.1.5 11250. Problem is this.
> I can read the freq. and mode change on the router screen but
> only the freq. in Writelog. It will only give me dits when
> keyed. I have it set for winkey . Question is there a CI-V
> setting needed in microham in order to forward the mode? At
> an end. Thanks in advance. Rog KI0F
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|