All:
After playing with this issue for over an hour and having
it behave as described below, I saved the log and re-started
Writelog, and the problem vanished!
If anyone has speculation as to why this might be, I'd like
to understand it. However, it is not a current problem for
me.
Thanks for the off-list replies!
73, Jeff K8ND
>
> -----Original Message-----
> From: writelog-bounces@contesting.com
> [mailto:writelog-bounces@contesting.com] On Behalf Of Jeff Maass
> Sent: Tuesday, December 30, 2008 20:46 PM
> To: writelog@contesting.com
> Subject: [WriteLog] Problem: "Packet Spots" Window for CQWW
> 160 CW (Writelog
> v10.69D)
>
>
> I am testing the current version of Writelog for use in the
> upcoming CQWW 160 CW Contest, and have an unexplained problem.
>
> The radio assigned is my K3, and the program is correctly
> displaying and follows the frequency on the radio. The
> bandmap shows the correct band, and shows incoming packet
> spots correctly.
>
> However, in the "Packet Spots" Window, selecting "Follow Me"
> does not limit spots displayed to those on 160 meters (i.e.
> there are spots for 20, 40, and 80 meters shown as well as
> those on 160). This makes it difficult to pluck useful spots
> from useless ones for this single-band contest!
>
> The options for the "Packet Spots" window are "All Bands"
> and "Follow Me". Selecting either makes no difference.
>
> Any ideas why this does not work? Can someone configure for
> the same contest and see if the behavior is the same?
>
>
> 73, Jeff K8ND
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|