>From the help files:
"LPT port PTT and A/B radio select
WriteLog outputs a rig A/B output on pin 14 and outputs a
PTT signal on pin 16 on the LPT port selected for CW, and on
the LPT port selected for the DVK, and on all LPT ports
selected to have antenna relays."
So you can select antenna relay and NA interface for your
LPT port, and the A/B relay should work. It works here. In
fact, I can't STOP it from working, even when I deselect
those two items. Maybe if I restarted the program it would
stop working.
Dave Hachadorian, K6LL
Yuma, AZ
----- Original Message -----
From: "Jim Fisher" <gm0nai@btinternet.com>
To: <writelog@contesting.com>
Sent: Wednesday, April 08, 2009 7:38 PM
Subject: [WriteLog] SO2R radio control via LPT pin14
> Since changing from LPT CW keying on my DX doubler to a
> Winkeyer USB on COM3.
> I can no longer switch the radio selection on the DX
> doubler.
> It is as if the CW LPT selection also enables LPT control
> of radio selection on Pin14?
> Is there a setup to allow control of LPT pin14 without
> having CW selected on the LPT?
>
> 73
>
> Jim
>
> GM0NAI
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|