Ron and Sid,
Thanks, but I did figure that one out. So when I start Writelog it hasn't
forgotten the set-up.
Hey, I also figured out how to open up my spam filter to anyone who
responds, cool...
John
----- Original Message -----
From: "Ron Hall, Sr." <ronkp2n@earthlink.net>
To: "John Musselman" <n6ep@arrl.net>
Sent: Sunday, May 31, 2009 4:50 PM
Subject: Re: [WriteLog] Fw: WKUSB and Writelog
> John ... When you change the PORTS setup and when complete you click on
> OK.
> Your very next step should be SAVE CONFIGERATION under SETUPS.
> After you have saved the configeration go to FILES and click on SAVE.
> I have had almost the same problem when changing from a CW setup to
> one for RTTY. Any changes in the PORTS setup will revert back to what
> ever
> is in the .INI file unless ou do the save commands.
>
> This may or may not be the problem but hope it helps.
>
> 73 Ron KP2N
>
> ----- Original Message -----
> From: "John Musselman" <n6ep@arrl.net>
> To: <writelog@contesting.com>
> Sent: Sunday, May 31, 2009 7:33 PM
> Subject: [WriteLog] Fw: WKUSB and Writelog
>
>
>> Dick,
>>
>> Thanks for your response and sorry about the challenge. That's an
>> automatically generated message from my spam filter. (It turns out it
>> will
>> challenge everyone on the reflector.)
>>
>> Anyway, if you're still not too ticked off, here's what I have. I'm
>> using
>> Writelog 10.67B and a Winkeyer USB I built about three months ago. The
>> Winkeyer works OK with the Winkey Test program.
>>
>> In Writelog, I opened Setup > Ports and selected "K1EL Winkeyer" for the
>> CW
>> Keyer Type and then clicked on the correct COM Port under the "CW"
>> column.
>> But when I type into the CW Keyboard window or hit the F keys, nothing
>> happens. I don't know what else I may need to do.
>>
>> I tried setting up the COM port two different ways. When I first
>> connected
>> the WK, it installed on COM5, so I used the device manager to move it to
>> COM2. I also moved it back to COM5 and used Commslot1=5 in the .ini
>> file.
>> Either way, it didn't work but the Winkey Test program did.
>>
>> Twice, when I was fiddling trying to get it to work, as I clicked OK on
>> the
>> Port Setup window the Winkeyer sent a Morse 'S'. But whatever that may
>> have
>> meant, it never worked after that.
>>
>> I also installed everything on a different computer with the same
>> results.
>> The Winkey Test program worked but Writelog didn't.
>>
>> Anyway, if you can see something I'm obviously doing wrong, I'd
>> appreciate
>> your comment and thanks in advance. Don't worry, the spam filter won't
>> block you again...
>>
>> John
>> N6EP
>>
>> ----- Original Message -----
>> From: "Dick-w0raa" <w0raa@comcast.net>
>> To: "John Musselman" <n6ep@arrl.net>
>> Sent: Saturday, May 30, 2009 10:13 PM
>> Subject: Re: [WriteLog] WKUSB and Writelog
>>
>>
>>>I use Writelog and the Winkeyer USB. Using it right now in the WPX CW
>>>Contest. No problem.
>>>
>>> Dick
>>> W0RAA
>>>
>>>
>>> ----- Original Message -----
>>> From: "John Musselman" <n6ep@arrl.net>
>>> To: <writelog@contesting.com>
>>> Sent: Saturday, May 30, 2009 10:36 PM
>>> Subject: [WriteLog] WKUSB and Writelog
>>>
>>>
>>>> Hi All,
>>>>
>>>> Anyone using Winkey USB with Writelog? I can't get it to work. If
>>>> there's
>>>> anyone who can help, I'll post what I've done.
>>>>
>>>> John N6EP
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> WriteLog mailing list
>>>> WriteLog@contesting.com
>>>> http://lists.contesting.com/mailman/listinfo/writelog
>>>> WriteLog on the web: http://www.writelog.com/
>>>
>>>
>>>
>>>
>>
>> _______________________________________________
>> WriteLog mailing list
>> WriteLog@contesting.com
>> http://lists.contesting.com/mailman/listinfo/writelog
>> WriteLog on the web: http://www.writelog.com/
>>
>
>
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|