K2MK is correct. The USER program runs on port 7300 (that is the port
that WriteLog connects to). The connection FROM the user program to
VE7CC node is on port 23.
73 - Jim AD1C
On 8/22/2009 10:43 AM, Gary AL9A wrote:
> Mike,
>
> Please reread Ron's last paragraph. Lee recommends using port 23 instead of
> 7300. If this is done and something happens to Lee's server, which has
> happened before due to his ISP or the local power going out, you are
> automatically reconnected to Ron's CC cluster - truly a seamless operation.
> Glade you like VE7CC User - it's a great interface.
>
> 73,
> Gary AL9A
>
>
> ----- Original Message -----
> From: "K2MK"<k2mk@comcast.net>
> To: "Ron Stordahl"<ron_n5in@yahoo.com>; "WriteLog Reflector"
> <WriteLog@CONTESTING.COM>
> Sent: August 22, 2009 4:20 AM
> Subject: Re: [WriteLog] VE7CC packet spot problem solved
>
>
>> Thanks Ron:
>>
>> I decided to try your suggestion of using the VE7CC User Program as an
>> intermediary. I searched the archive as you suggested and found out how to
>> do it.
>>
>> Open VE7CC User Program
>> Open WriteLog
>> On the WriteLog Telnet window, use an IP ADDRESS of 127.0.0.1 and a PORT
>> setting of 7300.
>>
>> Bingo, it works perfectly and it hasn't disconnected once in the 12 hours
>> I've been running it. It automatically feeds the packet information to
>> WriteLog. You just have to keep the VE7CC User Program running in the
>> background.
--
Jim Reisert AD1C, <jjreisert@alum.mit.edu>, http://www.ad1c.us
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|