When you use the accelerators Writelog must send extra commands
to the WinKey unit after the last character and before the
"release PTT" command. The extra commands are responsible
for the delay in the PTT release ... if you expect a quick
release, don't include accelerators at the end of the macro.
73,
... Joe, W4TV
> -----Original Message-----
> From: writelog-bounces@contesting.com
> [mailto:writelog-bounces@contesting.com] On Behalf Of Kostas Stamatis
> Sent: Sunday, February 28, 2010 2:23 PM
> To: REFLECTOR writelog
> Subject: [WriteLog] CW delay
>
>
> I noticed that writelog has a delay to release ptt when i
> send a cw message. the delay is more when i use <> in memory.
> for example i have this memory <<cq>> sv1dpi sv1dpi <<test>>
> I have not a space at the end (after the <<test>>) I have not
> problem also when is send f3= call tu sv1dpi I tried without
> the accelerators <> but the problem remains but little less.
> The delay is something more than a dit and loose the first
> dit from the
> other station.
> The only solution is to press escape when the message stops
> and this solves
> my problem
> My setup here is windows xp - interface mk2r+ and yaesu markv
> and i have
> noticed it with 26-30 wpm.
> When i use the mk2r+ memories i have not this problem.
> So i suppose that it is software-computer related.
> Anyone else has noticed this? and better has a solution?
> Kostas sv1dpi
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|