There is not a problem with your IC-7000. Try the RIT without Writelog running
and you'll see what I mean. Writelog's communication with the radio can clash
with button pushes on the radio. I had the same problem with my IC-756PRO. For
some reason my IC-7600 doesn't seem to have this problem. This could all be
solved if Icom would come out with a command set that included a RIT clear
command. Then the software could handle it and eliminate the need for pushing
buttons on the radio.
73,
Gary AL9A
Sent from my iTouch
On Jul 28, 2010, at 5:07 PM, K0BX <k0bx@arrl.net> wrote:
> I got a IC-7000 at Dayton this year to replace the IC-706MK2G.
>
> For the past month or two I have been using the IC-7000 at my home
> station. Today I was on SSB and one station came back a bit off frequency.
> So for the first time I used the RIT. After the QSO, I tried using the
> * to clear the RIT back to Zero.
>
> It didn't work? All of the other commands like split - worked fine. I
> use Writelog for all my QSO's even those outside of the contests.
> Any IC-7000 users out there with a similar problem?
>
> Joe K0BX
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|