WriteLog
[Top] [All Lists]

Re: [WriteLog] Omni VII mode problem

To: "Roger Wise" <jrwise@hbci.com>, <WriteLog@contesting.com>
Subject: Re: [WriteLog] Omni VII mode problem
From: "Gary AL9A" <al9a@mtaonline.net>
Date: Tue, 30 Nov 2010 10:41:55 -0900
List-post: <writelog@contesting.com">mailto:writelog@contesting.com>
Roger,

Might the problem lie with the particular contest module in use at the time 
rather than the Ten Tec?  Many contest modules, i.e., Sweepstakes and CQWW 
for two, are mode specific.  I just tried using my CQWW CW contest module, 
with my IC-7600, and cannot get the CW mode to change to the next mode up or 
down by using Ctrl+F01 or Ctrl+F02.  Bands changes work with Alt+F01 or 
Alt+F02, but not mode changes.  I'm not sure what would happen with a 
contest module like Field Day or the Russian DX contest where you are 
allowed to use various modes in the same contest.

I can change the mode to by clicking on the frequency and mode display 
button just below Radio in the Entry window and then selecting a different 
mode like SSB.  The radio then changes its mode.  If I manually change the 
mode by using the mode buttons on the radio WL will reflect the new mode in 
the frequency and mode button.  I'm not sure if this is how your Ten Tec 
behaves or not.

73,
Gary AL9A


----- Original Message ----- 
From: "Roger Wise" <jrwise@hbci.com>
To: <WriteLog@contesting.com>
Sent: November 30, 2010 9:39 AM
Subject: [WriteLog] Omni VII mode problem


>I am having a slight problem with Writelog reading any mode change.
> My set up.
> Micro ham keyer V7.71
> WriteLog     V10.82A
> Dx4win     V707.02
>
> Rig Ten Tec OmniVII.  WriteLog follows the frequency with no problem.  It 
> is
> when I make a mode change within the band or to another band it will not
> follow.
>
> I have had this problem for a while.  I have to make the change with in 
> the
> program itself and that works for that one change.  I click on the freq. 
> and
> change it from there.
>
> I use the Dx4win log program for general use and it follows just fine.  I
> also have used HRD and N1MM with no problem.
>
> Is there anyone out there with an Omni VII having the same issue?  No big
> deal, but would like to have it working if I have new young op's some day 
> at
> this station.
> Thanks  KI0F  Rog
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/ 

_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

<Prev in Thread] Current Thread [Next in Thread>