See the example configuration for WriteLog and the microHAM interfaces
available either via "Help | Download Documents" in microHAM Router or
on-line at www.microHAM-USA.com/support.html.
73,
... Joe Subich, W4TV
microHAM America, LLC.
http://www.microHAM-USA.com
http://groups.yahoo.com/group/microHAM
On 9/10/2011 10:03 AM, kp hpjr wrote:
>
> Trying to get my TS-2000x to work in WL using my MicroHam MicroKeyer.
>
> Using WL 10.86C. I do have the rig tracking freq info on Com9 @ 9600 baud.
> That sems to work fine.
>
> What I can not figure out is how to get the CW to send. I have tried various
> combination's of settings. The best I get is a steady tone to lock up. There
> is no PTT TX happening at all.
>
> My settings on the MicroHam router (Version7.7.1) are:
> CAT=Com9
> FSK=Com10 (PTT is checked here)
> CW=com11
> PTT=Com12
>
> My trouble lies on the Writelog "Port setup -- What is connected? screen" I'm
> not sure what combination is needed to get this thing to fly. Any help would
> be much appreciated.
>
> Kirk
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
>
--
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|