WriteLog
[Top] [All Lists]

Re: [WriteLog] MMTTY Challenges

To: "K2NV@arrl.net" <K2NV@arrl.net>, "[WriteLog]" <WriteLog@contesting.com>
Subject: Re: [WriteLog] MMTTY Challenges
From: "Joe Subich, W4TV" <lists@subich.com>
Date: Tue, 18 Oct 2011 18:01:59 -0400
List-post: <writelog@contesting.com">mailto:writelog@contesting.com>
Tony,

Where are you selecting COM 10?  WriteLog passes the COM port to
MMTTY when it initializes the plug-in.  Set the COM Port in the
RTTYrite menu then select MMTTY as the TU Type to open/initialize
the plug-in.

Note - you must use the plug-in and can't use a stand-alone copy
of MMTTY with Writelog.  I strongly recommend a separate install
of MMTTY in a separate directory for Wiritelog so there is no
"mixing" of the MMTTY.ini file between WriteLog and stand-alone
settings.

73,

    ... Joe, W4TV


On 10/18/2011 5:33 PM, K2NV@arrl.net wrote:
> I have been trying to get Writelog running with MMTTY and FSK.
> In stand alone mode, MMTTY works fine.  It also works fine with N1MM.
> I am using a real COM port (COM10) using 2N2222A keying for PTT and FSK. 
> (Winkey for CW)
> I am confused about the PORT selection.  When I select PORT 10 (and also in 
> MMTTY) MMTTY switches back to SOUND and FSK does not work.
> I have spent untold hours trying to figure things out.  And have read 
> everything on Don's very useful web site (AA5AU).
>
> I am using WInXP Home, Creative Labs sound card.
>
> Anyone??
> Tony
> K2NV
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

<Prev in Thread] Current Thread [Next in Thread>