Been busy the last couple of days, but wanted to make note of this. When
running in the BARTG Sprint last weekend I used the Clone window feature in
RittyRite for the first time in a contest. I had the first MMTTY window
Profile set to Fluttered signals (FIR) and set the cloned window Profile to
the AA6YQ FIR512 setting. To say the band conditions were tough that
weekend would be an understatement, but by using the cloned window setup I
was able to put about 6 additional QSOs in the log due to the AA6YQ FIR512
Profile decoding signals that were pure gibberish on the Fluttered signals
(FIR) Profile. Really amazed me at how well one profile would copy so well
through the mush while the other one was lost. Pretty impressive!
On a side note I have a question about the operation of the clone window.
When a call printed in the clone window clicking on either the call or the
serial number would not populate the appropriate fields in the Entry Window
and I had to hand type the info into the fields. However, I did discover
that I could right click on call in the clone window and send that call to
the stack! From the stack I could then Push the call into the CALL field.
Why doesn't left clicking the call in the clone window populate the Entry
box yet right clicking the call populates the call stack? Could an
improvement be made to the clone window logic to allow clicking the call and
exchange from either the main or clone RittyRite window to populate the
Entry Window?
73,
Gary AL9A
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|