WriteLog
[Top] [All Lists]

Re: [WriteLog] WPX RTTY and grab callsign with mouseclick

To: <writelog@contesting.com>
Subject: Re: [WriteLog] WPX RTTY and grab callsign with mouseclick
From: "Don Hill AA5AU" <aa5au@bellsouth.net>
Date: Mon, 13 Feb 2012 22:35:05 -0600
List-post: <writelog@contesting.com">mailto:writelog@contesting.com>
Yes, Gary has described eliminating the RST field very well.  Saved me some 
time tonight!  Like I said earlier, I normally always
eliminate the RST field.  If someone sends you an RST other than 599, you can 
always just log the QSO and then edit the QSO on the
fly to change the RST received information from 599 to whatever was received.

73, Don AA5AU

-----Original Message-----
From: Gary AL9A [mailto:al9a@mtaonline.net] 
Sent: Monday, February 13, 2012 3:31 PM
To: Don AA5AU; writelog@contesting.com
Subject: Re: [WriteLog] WPX RTTY and grab callsign with mouseclick

As usual, Don has a great idea!  Right now I'm pounding my head on the desk 
muttering "Why didn't I think of that?"!

Go to Contest/Exchange Format Setup...  In the "Edit QSO Exchange Fields 
window" click on the RS Exchange Field indicator on the left side.  On the 
right side clear the check mark from "Prompt.  Include in QSO entry prompt" 
and click Save, then OK.  Now the Entry window contains only CALL, NUMB, 
COUNTRY, C, no RS field.  Now when clicking a call with the mouse the cursor 
jumps directly to the NUMB field - there is no where else it can stop!

If you ever have someone send you an exchange other than 599 make a note of 
it on a scratch pad.  After the contest go into the Edit QSO Exchange Fields 
again and turn the RS prompt back on.  Then you can edit the field for that 
call before creating your Cabrillo file.

73,
Gary AL9A

----- Original Message ----- 
From: "Don AA5AU" <aa5au@bellsouth.net>
To: <writelog@contesting.com>
Sent: February 13, 2012 11:58 AM
Subject: Re: [WriteLog] WPX RTTY and grab callsign with mouseclick


Yes, I believe this is normal. A way around it is to get rid of the RST 
field in the Entry Window. When you eliminate the RST field in the Entry 
Window, the cursor will go immediately to the number field when a call is 
clicked. I know how to do it, but I don't have WL on this PC, so will post 
how to get rid of the RST field when I get home tonight.

73, Don AA5AU



>________________________________
> From: Stein Roar Brobakken <sroabr@online.no>
>To: writelog@contesting.com
>Sent: Monday, February 13, 2012 1:43 PM
>Subject: [WriteLog] WPX RTTY and grab callsign with mouseclick
>
>Hi
>
>Is it normal that when you grabbed a callsign with mouse click that the
>cursor jumps to RST 599 in logging window, than to serial number area????
>
>73s LA6FJA Rag
>
>
>_______________________________________________
>WriteLog mailing list
>WriteLog@contesting.com
>http://lists.contesting.com/mailman/listinfo/writelog
>WriteLog on the web: http://www.writelog.com/
>
>
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/ 

_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

<Prev in Thread] Current Thread [Next in Thread>