Randy, I'm assuming you're also unable to read the radio's frequency and mode.
Perhaps it's a baud rate issue. I don't know about the 746Pro--I have the 756
Pro III, and on that rig I've had good results by assigning 9600 baud via the
radio's menu. Of course, be sure to check the baud rate in WriteLog and set it
the same value.
73, Mark WA9IVH
On Feb 29, 2012, at 12:07 AM, haefka@aol.com wrote:
>
> Hello,
>
> Thank you for your help with the mono wav files. I have writelog working and
> am comfortable with it with the total exception of rig control.
>
> I have an Icom 746Pro and Rigtalk CAT CIV. I have setup the ports (verified
> my com), set freq mode, verified the default setting CIV setting on my ICOM,
> checked the right end of the RigTalk cable is plugged into the radio and
> USB, DVT to windows sound card, PTT to yes and also No, baud to default I
> have Winows 7, 64 bit.
>
> When I hit F2 I heard my audio from my PC but the rig does not transmit????
>
>
> Any ideas??
>
> Randy
> KL7MVX
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|