guys
I am trying to figure out how to get the radio to display on the program.
I upgraded my write log program to the most recent program a few days ago
I never had the computer able to display the radio's frequency.
I am able to key the radio and send cw but that is the extent
I am using the microham usb interface II and upgraded the most recent
software on it as
well
I have the radio set on com 4 and cw set on com 5
the radio is set for the following 6eh per the manaual
baud rate 9600 , ci-v transceive on
and ic731 off
the program is set as I said the first line in the writelog program is set
for com 4 , the radio is icom pro III
and the second line is set for com 5 the cw.
the settings in the microham virtual ports is set the same way as above .
com 4 is radio and com 5 is cw
what am I doing wrong?
i can key the radio with the program and send cw , just not getting the
freq display
thanks
scott w4so
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|