Trying to get my head around how to setup WL for the A.R.I. contest this
weekend. I would like to run both CW and RTTY, but have a dilemma I've
never run across before. In setting up the WL message memories CW and RTTY
messages share the same memory locations, but the messages between the two
modes are considerably different. Is there a good way to do this?
I don't want to have to type and retype all the memory messages as I switch
modes from CW to RTTY and back again. I'm considering setting up two
different logs, one for CW contacts, the other for RTTY. However the
exchange for non-Italian stations is RST and a serial number. If I run X
QSO's on CW and then switch to a different log for RTTY can I force WL to
start numbering the next contact with serial X+1? Finally, if I do create
two different logs based upon the mode how do I merge them together into a
single log to create the Cabrillo file and adif export file for my my
general logger? The adif isn't too much of a problem as I could just create
two adif files and import them both to my general logger. But the serial
incrementing and Cabrillo output has me stumped. Any suggestions?
73,
Gary AL9A
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|