John,
Sorry I didn't find your query until after the contest was over. For what
it's worth now, go to the Writelog Help manual and Search for "setup bands".
Click on the second item in the list, "Band Setup". Note in the first
paragraph that the Band Setup function is disabled, grayed out, if there are
any QSOs in the data base.
After reading this section I would do the following for your current log.
Export the log as an adif file and then close it. Start WL and select Start
a new contest. Select the Russian RTTY contest and then in this empty
contest module go Bands/Setup Bands... and configure the band edges per the
Help manual instructions. When complete save the empty contest to a new
location. Now select File/Import... and import the Russian RTTY contest
adif file you created from the other log. After importing I think you'll
find the red 'B' flags have gone away. Now save this log again and you can
delete the original log.
73,
Gary AL9A
----- Original Message -----
From: "John Maglio" <jgmags@comcast.net>
To: <writelog@contesting.com>
Sent: September 01, 2012 12:37 PM
Subject: [WriteLog] Bands Set Up
I am new to writelog and trying to set up for the Russian contest. For
every contact I make the sequence number has the red "B" after it.
Indicating out of band ? I am in the proper band or I wouldn't be making
contacts. Trying to correct the problem in the BANDS Menu, the Bands Set Up
function is greyed out. Where is the error in my set up? Other contest set
ups are ok in this area. Any help please?
Thank you,
KJ1J
John
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|