WriteLog
[Top] [All Lists]

[WriteLog] Fw: telnet

To: "Writelog Reflector" <writelog@contesting.com>
Subject: [WriteLog] Fw: telnet
From: "Courtney Judd K4WI" <k4wi@earthlink.net>
Date: Thu, 22 Nov 2012 16:11:40 -0600
List-post: <writelog@contesting.com">mailto:writelog@contesting.com>
ok now is working... spot will move to entry line.... just noticed that I 
did not have the MicroHam keyer turned on so there was no connection to the 
radio. Still doesn't answer why it won't connect to other telnet sites... oh 
well at least it is working! Too much turkey! tnx Cort


----- Original Message ----- 
From: "Courtney Judd K4WI" <k4wi@earthlink.net>
To: "Courtney Judd K4WI" <k4wi@earthlink.net>
Sent: Thursday, November 22, 2012 4:01 PM
Subject: Re: [WriteLog] telnet


now while it is getting spots, I can no longer click on the spot and have it
move to the entry window... something is still not right.. tnx to all that
are helping, Cort


----- Original Message ----- 
From: "Courtney Judd K4WI" <k4wi@earthlink.net>
To: "Hal Kennedy" <halken@comcast.net>
Cc: "Writelog Reflector" <writelog@contesting.com>
Sent: Thursday, November 22, 2012 3:55 PM
Subject: Re: [WriteLog] telnet


Hal I can get the w3lpl to work but all the others fail... no other computer
involved this used to work just fine..  tnx Cort
----- Original Message ----- 
From: "Hal Kennedy" <halken@comcast.net>
To: "'Courtney Judd K4WI'" <k4wi@earthlink.net>; <writelog@contesting.com>
Sent: Thursday, November 22, 2012 11:31 AM
Subject: RE: [WriteLog] telnet


Under the WL packet program, select file/telnet and put in w3lpl.net port
23.  See if it comes up.  Linking other computers to the one running telnet,
under XP, is under investigation, but if you wish to do so, I have a
work-around that plays very well.

73
Hal
N4GG


-----Original Message-----
From: WriteLog [mailto:writelog-bounces@contesting.com] On Behalf Of
Courtney Judd K4WI
Sent: Thursday, November 22, 2012 11:41 AM
To: Writelog Reflector
Subject: [WriteLog] telnet

I am trying to get packet up and running but all that happens no matter what

address I use is a message comes up with connection failed. I am using
writelog 11.06, XP pro, microHam keyer 2 to get to computer via USB... what
am I missing, thanks, Cort K4WI

_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/


_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/


_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

<Prev in Thread] Current Thread [Next in Thread>
  • [WriteLog] Fw: telnet, Courtney Judd K4WI <=