Re: [WriteLog] Hardware Generated FSK

[Steve AI9T <steve@ai9t.com>]

On 4/1/2013 3:36 PM, Ed Muns wrote:
> Steve AI9T wrote:
> > I have done this and it is still slow. Also the Hardware
> > Generated FSK is checked and grayed out.
> Do you have MMTTY's USB option set to "C: Limiting Speed" on the MMTTY
> Options Misc tab?  That is necessary to pace the characters over USB with
> the microKEYER.
Yes I do
> All three of the Rttyrite hardware and software FSK menu items are grayed
> out on the Rttyrite Port menu because you selected 'None' at the top.  This
> tells Rttyrite that you are not using its FSK capability but rather the FSK
> in your TNC choice, i.e., MMTTY.
>
> > I have removed all the sections from the INI file many times.
> > If I try to pick the standard MMTTY plugin I get the same problem.
> Which problem?  (Sorry, I don't mean to be flip, but I want to be sure I
> understand.)
>
> Ed W0YK
>
> > -----Original Message-----
> > From: WriteLog [mailto:writelog-bounces@contesting.com] On
> > Behalf Of Steve AI9T
> > Sent: Monday, April 01, 2013 11:52 AM
> > To: writelog@contesting.com
> > Subject: Re: [WriteLog] Hardware Generated FSK
> >
> >
> > On 4/1/2013 2:31 PM, Ed Muns wrote:
> > > Steve AI9T wrote:
> > > > I'm using the Microham MKII. Is there anyway to turn off
> > the Hardware
> > > > Generated FSK in this version of Writelog? I would rather
> > be able to
> > > > choose my port.
> > > If you use MMTTY as your main decoder and therefore your
> > encoder for
> > > transmit, then simply select 'None' on the Rttyrite Port
> > menu and then
> > > go to the MMTTY Options TX tab to set your FSK/PTT COM port.
> > I have done this and it is still slow. Also the Hardware
> > Generated FSK is checked and greyed out.
> > > > This just transmits way to
> > > > slow. I have tried ever configuration I can think of and I
> > can't get
> > > > it to work correctly. You can see it's not right in the RTTYRITE
> > > > window just the way the text goes across the screen when you send.
> > > Joe will have to address this.  The problem is between Rttyrite
> > > Hardware generated FSK and microHAM Router.  There is no
> > speed issue
> > > with direct COM port FSK/PTT keying.
> > Yes,, I agree it seems to be related between WL and MKII My S
> > & P rig setup uses a couple transisters for keying with no problems.
> > >    
> > > >     I reinstalled my regular MMTTY Plugin back into WL.
> > > This was not necessary because either MMTTY FSK or Rttyrite
> > FSK can be
> > > selected by virtue of the choice made on the Rttyrite Port menu.
> > > (Either 'None' or a COM port number.)  However, MMTTY
> > Plug-in and the
> > > XMMT.ocx interface can happily coexist.  The risk is confusion over
> > > which items on which menus to tick in order to get what you want.
> > >
> > > > I remove all the rttyrite sections from WL ini then I can
> > bring up WL
> > > > set the TU Type to the old MMTTY plugin. Then close WL and
> > reopen,,
> > > > then open a RTTYRITE window. If I try to go to TU Type
> > again there is
> > > > nothing but a blank pull down menu.
> > > > The RTTYRITE freezes and I have to shut it down from the taskbar.
> > > Try deleting all Rttyrite sections in writelog.ini again.
> > You may not
> > > have deleted all of them or maybe not in the active
> > writelog.ini file.
> > > be sure to exit WriteLog, then delete the Rttyrite ini
> > sections, then
> > > restart
> > I have removed all the sections from the INI file many times.
> > If I try to pick the standard MMTTY plugin I get the same problem.
> > > WriteLog.
> > >
> > > Ed W0YK
> > >
> > >
> > > _______________________________________________
> > > WriteLog mailing list
> > > WriteLog@contesting.com
> > > http://lists.contesting.com/mailman/listinfo/writelog
> > > WriteLog on the web:  http://www.writelog.com/
> > --
> > 73
> >
> > Steve AI9T
> >
> > http://www.ai9t.com
> >
> > AI9T DX Cluster
> >
> > Version 4 AI9T   Telnet: dxc.ai9t.com port 7300
> > Version 6 AI9T-2 Telnet: dxc.ai9t.com port 7373 (CW + Skimmer)
> >
> > _______________________________________________
> > WriteLog mailing list
> > WriteLog@contesting.com
> > http://lists.contesting.com/mailman/listinfo/writelog
> > WriteLog on the web:  http://www.writelog.com/
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/
--
73

Steve AI9T

http://www.ai9t.com

AI9T DX Cluster

Version 4 AI9T   Telnet: dxc.ai9t.com port 7300
Version 6 AI9T-2 Telnet: dxc.ai9t.com port 7373 (CW + Skimmer)

_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/