Unfortunately this is the way it works now. I am disappointed because I
have previously depended on the transmission printing to be closed sync'd
with the actual transmission. I have used that information to time my
transmissions on other radios. MMTTY with the MMTTY Plug-in had exellent
correlation between printed transmitted characters (blue Italic text in the
Rttyrite window) and the actually transmitted characters.
However, I've come to learn that some other ops pay no attention to the
transmission printing and instead rely on the monitor audio to tell them
when the transmission is finished. Nonetheless, I have made the request for
this to be fixed in WriteLog but I don't know how feasible that is.
Ed W0YK
Anthony N2KI wrote:
> I did my upgrade to v 11.11C and followed the procedure
> outlined on Don's page. Initially I had trouble when
> starting WL and traced it to a bad comm port number in the
> ini file. Once this was fixed and I tested WL using XMMT
> and found there to be a timing problem with what is being
> sent in relation to how it appears on the transmit window in
> Rittyrite. The transmit window prints what is being
> transmitted but the actual transmission is still ongoing well
> after the TX window displays what is being transmitted.
> Anyone else seeing this? Is there a fix? Thanks
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|