Steve,
I'm not sure what the difference is between using a 3 or a 5? The WL manual
seems to indicate anything other than zero invokes the command.
BTW, I have been experiencing some weird behavior with the Insert key too.
The default for WL is to grab that last highlighted call and enter it into
the CALL field. I've never liked that as I think the guy that got in first
should be worked first. So usually I left click on the first highlighted
call and then right click on the second or third calls to put them into the
stack while I'm working the first guy. Lately that hasn't been working
right and the Insert key bumps the call I clicked on and puts in the last
highlighted call.
After checking my ini file for your problem it suddenly dawned on me that
having the InsertOverridesCall=1 was probably the culprit so I set it back
to 0. Sure enough, the problem went away and my method of clicking and
working was back in business. Glad you had a problem Steve or I might not
have ever found out the source of my difficulty. No idea how or why that
got changed from a 0 to a 1.
73,
Gary AL9A
-----Original Message-----
From: Steve AI9T
Sent: December 21, 2013 7:39 AM
To: Gary AL9A ; WriteLog Reflector
Subject: Re: [WriteLog] Insert Key
Thanks Gary and all
I go it fixed. Somehow the number got changed from 3 to 5. I sat it back
to 5 and now it's working as it should.
--
73
Steve AI9T
http://www.ai9t.com
AI9T DX Cluster
Version 4 AI9T Telnet: dxc.ai9t.com port 7300
Version 6 AI9T-2 Telnet: dxc.ai9t.com port 7373 (CW + Skimmer)
On 12/21/2013 11:09 AM, Gary AL9A wrote:
Steve,
Check your [Configuration] section for the following command from the Help
manual. Don't know of anything that would cause this unless you've
somehow created a keyboard shortcut that has assigned the Insert key to
some other action.
InsertOverridesCall non-zero and pressing the INSERT key on the keyboard
will use the RTTY window to override any CALL entry. This entry affects
only RTTY operation.
InsertOverridesCall=0
So to use the Insert key for grabbing a RTTY call it should be:
InsertOverridesCall=1
73,
Gary AL9A
-----Original Message----- From: Steve AI9T
Sent: December 21, 2013 6:22 AM
To: 'WriteLog Reflector'
Subject: [WriteLog] Insert Key
I'm not sure why but my insert key is no longer grabbing the highlighted
Callsign and calling the station. Could someone tell me what I might be
missing in my INI file
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|