What transceiver are you using?
WriteLog will not "release" the CW/PTT port unless you load
a new ini file or use "setup" to disable CW. So unless you
put CW/PTT on the same port as radio control, you will need
a third port (and FSK/PTT interface) to run a separate copy
of MMTTY anyway.
73,
... Joe, W4TV
On 1/21/2014 7:42 PM, G wrote:
Joe
I tried in the pass and for some reasons it did'int work.
So I got in touch with RB tech & was told that to operate RTTY ((( FSK ))) (
for the RTTY filters & TPF during contests ) I have to use two port on my
desktop to Rigblaster Pro.
This week I will try your below details & download those softwares
Gilles ve2lx
==================
-----Message d'origine-----
De : WriteLog [mailto:writelog-bounces@contesting.com] De la part de Joe
Subich, W4TV
Envoyé : 21 janvier 2014 14:35
À : G; [WriteLog]
Objet : Re: [WriteLog] MMTTY separate temporary from WRITELOG
WL being hooked to MMTTY by MMTTY plugin we do not have access to com
port in MMTTY to temporary configure it to RX on its com and TX on
new com port.
That is not correct - (((((( one can set the port using the RTTYrite Port
menu and reinitialize the MMTTY plug-in if using the *old* SM6SRW
plug-in. If using the new XMMT.OCX version of MMTTY, one can set
the FSK Port to *none* in the RTTYrite menu and select the port in
the MMTTY configuration dialog.))))))
> I use WL on com 1 for RX no TX and com 2 for TX.
I do not understand why you would use two ports for Writelog. CW is
supported on the same port as radio control so one only needs two
ports for radio control, CW, PTT and RTTY.
73,
... Joe, W4TV
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|