Steve,
There is a work around, but it takes a bit to get it going. If you have a
RTTY receive window on the extended desktop monitor a left click will not
paste into the CALL field. But, a right click will paste it into the
'stack'. If you have a keyboard shortcut setup to 'pop' the the call from
the stack it will put it into the CALL field. So the sequence becomes,
Right click on the call, then hit the Shortcut key, then hit Insert to send
the message. A bit cumbersome, but it works. Best used for a clone window
on the extended monitor with a different decoding parameter running.
73,
Gary AL9A
-----Original Message-----
From: Steve AI9T
Sent: March 30, 2014 10:36 AM
To: writelog@contesting.com
Subject: Re: [WriteLog] Callsign Entry
Never mind I found the answer via good ole google.. He has separate
monitors and the rttyrite window and log entry window were on different
monitors. They need to be on the same screen.
--
73
Steve AI9T
http://www.ai9t.com
AI9T DX Cluster
Version 4 AI9T Telnet: dxc.ai9t.com port 7300
Version 6 AI9T-2 Telnet: dxc.ai9t.com port 7373 (CW + Skimmer)
On 3/30/2014 2:25 PM, Steve AI9T wrote:
I'm trying to help a friend with his Writelog setup. He has changed
something. Now when he clicks on a call in the Rttyrite window the call is
not being placed into the Callsign entry window.
Anyone have any idea what he has changed?
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|