More than likely an issue with the board or the driver. I installed a Syba
4-port PCIe serial card in my Windows 8 machine and at
first Windows didn't like the drivers that came with the board. So I
uninstalled it and allowed Windows to go find drivers for it.
Well, it did and it works fine now.
All I can suggest is to either allow Windows to find the driver for the board
or make sure you have an updated Windows 8 driver by
going to the manufacturer's website. Don't rely on the drivers that came with
it.
73, Don AA5AU
-----Original Message-----
From: WriteLog [mailto:writelog-bounces@contesting.com] On Behalf Of Rich
Sent: Sunday, July 20, 2014 10:04 AM
To: writelog@contesting.com
Subject: [WriteLog] Win8 and PCIe comports
I do not believe this is actually a WL problem, but I was curious if others
have seen the same issues. I have a Rosewill PCIexpress
comport
(4 ports) board in my Win8 machine, When I setup for the NAQP RTTY i
experienced a host of comport issues. Com 1 seemed to work
fine, however Com 2 and 3 were having great difficultly working with WL. They
would work for a minute or two and then hang and
then would not work at all. I finally pulled the board and used USB/232
adapters.
As I said I really do not think this is a WL issue. Have others had these
issues with WL and Win8 using a PCIe comport card?
Thanks
Rich
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2014.0.4716 / Virus Database: 3986/7885 - Release Date: 07/19/14
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|