Hi,
I'm running version 11.22g and I am unable to get writelog to
network. I do the "tools-register to accept network connection" on the
run computer
its set to name: n1mgo1 Letter is set to A
on the multiplyer computer I do the same except the name is different
and the letter is B.
Then I do the "tools-link to network" on the multi station and enter
'n1mgo1' for the name to connect to. It says it connects, but nothing
is updated for qso's .
If I go back to "tools-link to network" it says I'm allready connected
to 127.0.53.53 and 127.0.0.1
n1mgo1 is at address 10.0.0.10 and multi cpu is at 10.0.0.11
I tried a different cpu on the network with the same results - connected
but no updates and the same connected to ip addresses as above.
All cpus are running win7 home
I tried turning off the firewalls, rebooting connecting to a different
computer,
I have run writelog for many years and this is the first time I have
been unable to get the network up.
Gordon - N1MGO
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|