WriteLog
[Top] [All Lists]

Re: [WriteLog] Bandmap and Timed CQ issues

To: "'Joe Subich, W4TV'" <lists@subich.com>, <writelog@contesting.com>
Subject: Re: [WriteLog] Bandmap and Timed CQ issues
From: "Randy Thompson K5ZD" <k5zd@charter.net>
Reply-to: k5zd@charter.net
Date: Sun, 5 Oct 2014 05:18:17 -0000
List-post: <writelog@contesting.com">mailto:writelog@contesting.com>
I am using FSK keyed through two serial ports.  I am using the W5XD MK1100
keyer for the audio switching.  PTT is set to none. Not sure how PTT is set
by WL when using FSK.

I am running 2Tone as the primary decoder. But, I have seen this same issue
with both 2Tone and WL's Rttyrite.

Randy

> -----Original Message-----
> From: WriteLog [mailto:writelog-bounces@contesting.com] On Behalf Of Joe
> Subich, W4TV
> Sent: Wednesday, October 01, 2014 1:38 AM
> To: writelog@contesting.com
> Subject: Re: [WriteLog] Bandmap and Timed CQ issues
> 
> 
> It may be due to multiple sources of PTT ... what are you using for PTT,
> what interface and what kind of SO2R switch (if any for RTTY)?
> 
> FSK or AFSK?
> 
> 73,
> 
>     ... Joe, W4TV
> 
> 
> On 2014-09-30 9:29 PM, Randy Thompson K5ZD wrote:
> > I have been seeing this for several years.  Probably saw it 3 dozen
> > times this weekend.
> >
> > Happens when you switch between the two radios. I think it is just a
> > bug from the software still thinking it is transmitting the buffer,
> > even though the PTT has released and we are in receive.
> >
> > I sometimes hit the escape key to stop transmission and that gets it
> > back in the receiving mode.  Of course, it also kills the transmit
> > buffer I was sending for real.
> >
> > Randy, K5ZD
> >
> >> -----Original Message-----
> >> From: WriteLog [mailto:writelog-bounces@contesting.com] On Behalf Of
> >> Dean St. Hill
> >> Sent: Wednesday, October 01, 2014 1:08 AM
> >> To: Michael Gulbranson
> >> Cc: WriteLog Reflector
> >> Subject: Re: [WriteLog] Bandmap and Timed CQ issues
> >>
> >> Had a similar issue this weekend during cqww. I am running so2r with
> >> 2*ft950's - when I would interrupt a running message on say rig 1 -
> >> by starting a message on rig 2; the message on rig 1 would continue
> >> but the
> >> rig1 would stop tx. So mmtty is "stuck" in transmit until the buffer
> >> is finished and therefore misses the first part of the other
> >> station's transmission on that frequency.
> >>
> >> I am 100% sure this was not happening before. I figure its some kind
> >> of config issue but I follow the rttycontesting.com or uHam example
> >> settings faithfully so I have no idea where to start.
> >>
> >> Maybe I never noticed before (in recent times) because I wasn't
> >> really fully doing SO2R operations. This contest was the first real
> >> SO2R in several years as I was rebuilding and it was easier to go
> >> with single rig contesting with all the changes around me.
> >>
> >> Hope someone has a solution.
> >>
> >>
> >> Regards
> >>
> >>
> >> Dean - 8P6SH
> >>
> >>
> >> On Sep 29, 2014 7:21 AM, "Michael Gulbranson via WriteLog" <
> >> writelog@contesting.com> wrote:
> >>
> >>> Help
> >>>
> >>>
> >>>
> >>> I experienced an issue with timed CQ and trying to cancel using the
> >>> ESC key.
> >>> This is what happens.  I can cancel the CQ shortly after initiating
> >>> a timed CQ using the ESC key.  However, if I am doing a timed CQ for
> >>> 2-3 minutes or so, I cannot cancel the CQ using the ESC key. The
> >>> quick way to stop the CQ is to toggle the focus to the other rig.
> >>>
> >>>
> >>>
> >>> I have two rigs connected but I was not operating SO2R.
> >>>
> >>>
> >>>
> >>> Issue with Bandmap has to do with what appears to be a WL slow
> >>> response with the bandmap update anytime I am tuning up/down the
> >>> bands.  Is there any way to improve(reduce)bandmap update response
> >>> time?
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>> Any ideas?
> >>>
> >>>
> >>>
> >>> Thanks
> >>>
> >>>
> >>>
> >>> Mike
> >>>
> >>>
> >>>
> >>> _______________________________________________
> >>> WriteLog mailing list
> >>> WriteLog@contesting.com
> >>> http://lists.contesting.com/mailman/listinfo/writelog
> >>> WriteLog on the web:  http://www.writelog.com/
> >>>
> >> _______________________________________________
> >> WriteLog mailing list
> >> WriteLog@contesting.com
> >> http://lists.contesting.com/mailman/listinfo/writelog
> >> WriteLog on the web:  http://www.writelog.com/
> >
> > _______________________________________________
> > WriteLog mailing list
> > WriteLog@contesting.com
> > http://lists.contesting.com/mailman/listinfo/writelog
> > WriteLog on the web:  http://www.writelog.com/
> >
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/

_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

<Prev in Thread] Current Thread [Next in Thread>