Gary,
At that time I was using the CT-17 to interface the radio and the
PW-1 amp.
You were probably seeing collisions between the radio's response to
WriteLog's polling and the PW-1. You're lucky the bad frequencies
in WriteLog were the only problem with that configuration.
73,
... Joe, W4TV
On 2014-10-22 11:23 PM, Gary AL9A wrote:
I think Joe is onto something. I used to see the weird frequencies
flash in the bandmap from time to time too and thought it was a WL bug.
At that time I was using the CT-17 to interface the radio and the PW-1
amp. After incorporating the microHAM microKEYER II and using its
dedicated CI-V output for the PW-1 the bandmap jitters disappeared. I
hadn't really thought about it much since there have been multiple WL
upgrades in the interim and I was thinking they fixed the bug, whatever
it was. But now Joe has me thinking the it was probably an RF problem
that has somehow been "cured" by the MKII. Different length cables or
more ferrite cores? Not sure, but it is no longer a problem for me.
73,
Gary AL9A
-----Original Message----- From: joeduerbusch
Sent: October 22, 2014 2:17 PM
To: NR Smith
Cc: writelog@contesting.com
Subject: Re: [WriteLog] Erroneous Frequencies
I had the same problem, RF getting into the CV-I cable, that is if you are
using an ICOM rig.
When I went to a FLEX-3000 rig and used a virtual CAT cable, the problem
went away. I don' t think it is a WL problem.
Joe K0BX
On Wed, Oct 22, 2014 at 10:12 PM, NR Smith <nrsmith@citlink.net> wrote:
I am getting Erroneous Frequencies on my bandmap when I transmit. Not
all
the time but quite often.
Is it RF causing this, or something else?
Nick,
W4GKM
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|