It sounds like you may have both hardware and software PTT enabled. If you have
a hardware connection for PTT, make sure you un-check COMM PTT in Ports Setup.
73, Don AA5AU
From: hk6psg <hk6psg@gmail.com>
To: writelog@contesting.com
Sent: Monday, September 21, 2015 12:28 PM
Subject: [WriteLog] info
Buenas, tengo un problema, estoy tratando de que el programa me trabaje con
el software mmtty pero no he podido que se me acoplen, ya he leido las
instrucciones que hay en internet para enfasarlos pero me es imposible, la
unica forma que hay transmision es undiendo el xmit del radio y enviar el
macro de resto imposible, alguien tiene una idea de que puede ser?
El mmtty solo funciona perfecto
Tambien tengo el problema de que cada vez que miro como conectar el
programa al radio, siempre se activa la trasmision y de la unica forma que
se detenga es desconectar el el radio del puerto.
Alguna idea para resolver estos dos inconvenientes?
Gracias
Atentamente
LUIS
HK6P
Hi, I have a problem, I'm trying to get the program to work me with MMTTY
software but have not been able to engage me, I have read the instructions
there on the internet for enfasarlos but I can not, the only way that no
transmission is xmit'll slow it down the radio and send the rest macro
impossible, someone has an idea that can be?
MMTTY only works perfect
Also I have the problem that every time I look at how to connect the
program to the radio, the transmission is always active and the only way to
stop it is to disconnect the radio port.
Any idea to solve these two problems?
Thank you
Sincerely
LUIS
HK6P
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|