WriteLog
[Top] [All Lists]

Re: [WriteLog] SO2R RTTY

To: "Gary AL9A" <al9a@mtaonline.net>, "Writelog" <writelog@contesting.com>
Subject: Re: [WriteLog] SO2R RTTY
From: "Steve Colello" <colellos@earthlink.net>
Date: Wed, 23 Sep 2015 21:09:00 -0400
List-post: <writelog@contesting.com">mailto:writelog@contesting.com>
The radio 2 is on the second monitor. Haven't had the problem before with XP. Will try to put the radio 2 decode screen on the main monitor and see if that works. Thanks a lot for the help--really appreciated.

See you on the contest.

Steve
KA2KON

-----Original Message----- From: Gary AL9A
Sent: Wednesday, September 23, 2015 6:19 PM
To: Writelog
Subject: Re: [WriteLog] SO2R RTTY

Steve,

Is your radio 2 decode screen on the main monitor or an extended desktop
monitor?  Clicking on a call in Rttyrite will only fill the Call field if
the screen is on the main monitor.

If there is no room on your main monitor for the radio 2 decode screen,
there is a work around.  Setup WL to display the call stack window.  Create
two keyboard shortcut keys to Push calls to and Pop calls from the stack.
When a call is highlighted in the Rttyrite window on the extended monitor do
a right click on it.  That will Push it onto the stack - you can see the
call in the stack window.  Now press the keyboard shortcut key you defined
to Pop the call from the stack and it will populate the Call field.  Your
normal macros will now send your exchange.

73,
Gary AL9A

-----Original Message----- From: Steve Colello
Sent: September 23, 2015 11:38 AM
To: Writelog
Subject: [WriteLog] SO2R RTTY

I have upgraded my computer from Windows XP to Windows 7 and over the course
of a few months have gotten everything working FB. Setting up for the CQWW
RTTY with SO2R, which worked great under XP, I came across a really funny
situation. My run radio (radio 1) works great under RTTYrite  and my
multiplier radio (radio 2) also works great except one issue. On the
multiplier radio everything works except when a call appears highlighted in
the RTTYrite box and I click on it, it does not put the call in the call
box. If I right click on the call and send it to the band map for radio 2
and then click on the call in the band map, it does populate the call box
with the call. BTW, I am using XMMT. If I can’t figure this out, it is going
to be a real pain S+Ping with radio 2.

Any ideas?

Steve
KA2KON
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/
<Prev in Thread] Current Thread [Next in Thread>