Rob,
I don't have V12 yet, need a new computer first :). But, I think these will
still work in V12.
In your [Configuration} section of writelog.ini add the following -
AutoSaveCount= 1
From the Help manual - "Set AutoSaveCount to the number of QSOs allowed
between automatically saving the log. Set this to -1 and WriteLog will not
autosave. If you make no entry here, WriteLog will auto-save after every 100
QSOs."
As for the default CW speeds, go to Setup/Ports and then click on the CW
Speeds tab. In the table of CW speeds set the left most window on the
second row to your default speed. This should then show up as the default
when you start WL. You will probably have to do this for both radios.
73,
Gary AL9A
-----Original Message-----
From: Rob K6RB
Sent: January 20, 2016 8:40 AM
To: WriteLog
Subject: [WriteLog] Version 12 question
I successfully installed V. 12 but was never asked if I wanted to import my
.ini file. As a result I had to go through and set up all the port info,
etc., to get it all working. However, I am now getting the "20 QSOs before
save" message, or something like that. With V.11 I had done something that
got the program saving after each QSO. What's the magic trick?
Also, how can I get it to set 32 wpm as the default speed on radios 1 and 2?
Rob K6RB
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|