[WriteLog] cq wpx multi 2 category

[Kostas SV1DPI <sv1dpi@otenet.gr>]

In the last CQ WPX RTTY we participated in M2 category with Writelog. It 
is supposed that you must give a separate serial number per band. We 
used version 11 and we had 2 computers (one per radio) connected 
together. There was not a mult station. Unfortunately writelog gave 
serial number in the same serie for all qsos. What was my mistake?
...73 de SV1DPI
(One of SZ1A-EP6T)

On 1/3/2016 9:29 μμ, Gary AL9A wrote:
> Dan,
>
> I made the same mistake myself a couple of days ago, but caught myself 
> after only about 50 entries in the log.  I tried doing a block edit 
> from within WriteLog, but that apparently isn't possible so I manually 
> entered my call in the Operator column for those 50 entries.  Wouldn't 
> want to do it with 130 entries though.
> My recommended solution would be the following;
>
> 1. Go to http://www.k8ut.com/file-gallery/programs and download 
> Larry's excellent ADIF2CSV file converter program.
> 2. Run the ADIF2CSV converter to convert your WriteLog adi file into a 
> csv file.
> 3. Load the converted csv file into Excel and add a new column titled 
> OPERATOR.
> 4. Enter your call into the first line of the OPERATOR field and copy 
> and paste it into all the other record rows.
> 5. Do a Save As and save the file as a .txt file.
> 6. Now go to http://sp7dqr.pl/en/converters.php and download Marek's 
> TEXT2ADIF converter and use this utility to get you back to a adi file.
> 73,
> Gary AL9A
>
> -----Original Message----- From: DanW
> Sent: Monday, February 29, 2016 1:54 PM
> To: 'Gary AL9A' ; writelog@contesting.com
> Subject: How to Add [OPERATOR] and populate it after the fact
>
> In the RST Special Event, I wanted to add the Operator (KL1JP) to my ADIF
> export file (after I logged 130 entries).  I can easily (and did) add
> [OPERATOR] field to the working fields within my writelog RST-KL1JP.wri
> logging file after the event but how can I populate my call to all 130+
> entries in the Field without typing each one in.  Granted, this is "after
> the fact - fix it issue"... If I add the KL1JP to the first entry 
> within the
> .wri file and I export it, then only that first field in the ADIF 
> contains
> the entry as KL1JP as OPERATOR.  The remaining ADIF entries (129) do not
> contain the ADIF entry OPERATOR nor my call.  If I added the OPERATOR 
> field
> beforehand, it might have been easier but how can I fix this?  . I don't
> see a SQL database command manner to add my call.  Tips, suggestions,
> comments appreciated.
>
> Dan KL1JP
>
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/