I have not tried SO2R RTTY on a single PC with CSS yet but plan on doing so. I
know you have to tell MMTTY1 to use left audio and MMTTY2 to use right audio in
MMTTY setup. It appears you have configured VB-Cable correctly for left/right
audio.
Don AA5AU
From: Ron Lodewyck <rwlodewyck@gmail.com>
To: Writelog <writelog@contesting.com>
Sent: Thursday, September 1, 2016 8:32 AM
Subject: [WriteLog] CSS SO2R No Radios
Thank you Wayne for the Contest Super Simulator. It is quite realistic and
I have been having a lot of fun with it, mostly on RTTY. It is a great
way to hone your contesting skills.
I have not had success, however, in setting up SO2R RTTY without radios
attached, i.e. Manual Entry of the frequency and mode (FSK).
Briefly, the problem seems to be an inability to separate the two audio
streams so that Left channel feeds MMTTY1 and Right channel feeds MMTTY2.
I always wind up with both channels merged and fed into both MMTTY1 and
MMTTY2.
I have tried to select 'Headphones Split' from the Radio menu but it is
greyed out unless I also set up two K3s on COM12 (or whatever) and change
from Manual Entry/FSK to 'Rig on COM12 in one Entry window and Rig(2) on
COM12 in the second Entry Window. I thought this would allow me to select
a virtual SO2R Controller from Setup-->Ports-->SO2R, but that only opens a
blank drop down list.
I am using VB-Audio Cable successfully with SO1R and I have selected Left
Source for MMTTY1 and Right Source for MMTTY2.
Writelog Version 12.08C
CSS Version 1.6.5.0
Any suggestion? TIA and 73,
Ron N6EE
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|