It doesn't matter, but curious to know which version of WL are you running -
Version 11 or 12?
How are you "starting RTTYRite?". To start the RTTY window, go to the Windows
menu in WriteLog and select the first option which is "RTTY Window". Notice the
icon with the green background and yellow XY pattern? Once you start the RTTY
window, if you don't see the Rttyrite window appear, look down in the taskbar
and see if there is a Rttyrite icon. It will be the same green icon with the
yellow XY scope pattern.
If it's there, then perhaps it's hidden behind the main WriteLog window. You
may have to resize your windows in order to bring the Rttyrite window to be
visible.
Let us know.
73, Don AA5AU
From: GW4BKG <GW4BKG@btinternet.com>
To: writelog@contesting.com
Sent: Saturday, January 28, 2017 4:04 AM
Subject: [WriteLog] Writelog MMTTY & XMMT.ocx
I have been trying to enable MMTTY through Writelog but have encountered
some difficulties and would appreciate advice.
I have installed MMTTY in C:\MMTTY together with XMT.ocx.
When I click on "start RTTYRite" all that happens is that the RTTY Control
Panel appears.
I should mention that I am running Windows 10 64 bit and am using an
FTDX-1200 with a SCU-17 usb interface unit.
I am able to use MMMTTY on a standalone basis using extfsk.dll both receive
and transmit.
Any suggestions.
Tks
Steve
GW4BKG
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|