Hi Marsh,
You can use the "Help" from within WriteLog and search for "CW and RTTY
and Voice Memory Setup" -- but only on the latest version. You won't
find %GP in the older versions' help menu. The PDF help file online is
not up to date with 12.18, but we're working on updating that this week.
Converting from chm to pdf is a challenge. :)
Thanks,
Steve N9OH
On Tue, Jul 18, 2017, at 09:09 AM, marsh@ka5m.net wrote:
> Hi Steve,
>
> Would you tell me which manual you are looking at that describes "GP" and
> how to get it?
>
> There are at least two (2) ways to download a WriteLog Manual, and there
> is
> "Help" from within V12.18F. None of them describe "%GP" that I can find.
>
> Marsh, KA5M
>
>
> -----Original Message-----
> From: WriteLog [mailto:writelog-bounces@contesting.com] On Behalf Of
> Steve
> Woodruff
> Sent: Tuesday, July 18, 2017 7:11 AM
> To: Jeff Stai <wk6i.jeff@gmail.com>
> Cc: Writelog Reflector <writelog@contesting.com>
> Subject: Re: [WriteLog] WriteLog 12.18 is now available!
>
> Hi Jeff,
>
> From the WriteLog manual:
>
> the letters "GP" -- WriteLog polls the rig through its COM port driver to
> detect the end PTT. WriteLog invokes this polling only if the message is
> otherwise empty, that is, sends no CW, RTTY or SSB WAV messages.
> Therefore
> make sure there are no blank spaces in the message. Note that programming
> %GK to invoke an external (non-WriteLog) DVK does otherwise leave the
> message blank, and is processed along with the %GP in the order they
> appear.
> So %GKnn followed by %GP enables WriteLog to use an external DVK as if it
> were a supported one as long as the %GK has the effect of getting the
> rig's
> PTT set to on. WriteLog ignores %GP if the rig driver does not support
> PTT
> polling. Only certain WriteLog rig drivers support this feature.
> Currently,
> only the Elecraft K3 rig driver is supported.
> The macros such as this can be found in the help file under "CW and RTTY
> and
> Voice Memory Setup"
> Thanks,
>
> Steve N9OH
>
>
> On Mon, Jul 17, 2017, at 08:18 PM, Jeff Stai wrote:
> >
> >
> > On Fri, Jul 14, 2017 at 7:17 AM, Steve Woodruff <steve@n9oh.com>
> > wrote:>
> >> * Support for %GP macro in message buffers. Currently only the Elecraft>>
> K3 rig driver.
> >
> > OK, I'll bite. What is a %GP macro? Thanks - jeff wk6i
> >
> > --
> > Jeff Stai ~ wk6i.jeff@gmail.com
> > Twisted Oak Winery ~ http://www.twistedoak.com/ Facebook ~
> > http://www.facebook.com/twistedoak
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|