WriteLog
[Top] [All Lists]

Re: [WriteLog] Flex 6700 and Writelog 12.10E

To: "steve@ai9t.com" <steve@ai9t.com>, 'WriteLog Reflector' <writelog@contesting.com>
Subject: Re: [WriteLog] Flex 6700 and Writelog 12.10E
From: Robert Hess via WriteLog <writelog@contesting.com>
Reply-to: Robert Hess <w1rh@yahoo.com>
Date: Mon, 6 Nov 2017 23:29:56 +0000 (UTC)
List-post: <mailto:writelog@contesting.com>
Writelog will not work with the Maestro and the Flex drivers.  Why the program 
wants to see two slices (A/B) for Radio 1 and two slices (C/D) for Radio 2 is 
beyond me.  The Maestro only recognizes slices A and B, so it absolutely cannot 
be used for SO2R using the Flex Drivers in Writelog.  You can use the Maestro 
if you use the Kenwood drivers.  Switching is awful clunky.  Many have 
complained on the reflector.
So.....Saturday, prior to SS, I loaded N1MM and set it up for SO2R with the 
6700.  The switching is quiet, quick and seamless and it works just fine with 
the Maestro.  I did not use N1MM for the contest.  Not familiar enough with the 
program, but it's looking like this long-time Writelog user may have to switch.
BobW1RH

      From: Steve AI9T <steve@ai9t.com>
 To: 'WriteLog Reflector' <writelog@contesting.com> 
 Sent: Monday, November 6, 2017 3:19 PM
 Subject: [WriteLog] Flex 6700 and Writelog 12.10E
   
Today I installed the latest Flex driver for Writelog. It's been a while 
since I used WL so I thought I would try it with the new Flex Driver. I 
wanted to see if the SO2R switching was improved.

First of all I use a Maestro with my 6700 so I only have 2 slices A & B. 
From what think I'm seeing it looks like I can't use the Maestro since 
WL wants to use slices C & D for the second radio. Am I correct or am I 
missing something here?

Also for some reason when I'm making changes to my configuration 
settings it is not being saved. I make my change hit apply then Save 
Configuration but after I restart WL the changes were not saved.

Any Ideas?

Hope this makes some sense!

-- 
73

Steve AI9T

http://www.ai9t.com

AI9T DX Cluster

Version 4 AI9T  Telnet: dxc.ai9t.com port 7300
Version 6 AI9T-2 Telnet: dxc.ai9t.com port 7373 (CW + Skimmer)

_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/


   
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/
<Prev in Thread] Current Thread [Next in Thread>