Typically, callsigns will be highlighted in yellow (new multiplier), green (new
station) or red (dupe). You can then click on any portion of the callsign and
the full call will be pulled into the Entry Window. This does not hold true for
calls that are not highlighted. You must click on the first character of the
callsign if it is not highlighted. Same for reports. You have to click on the
first letter or number of the report.
If callsigns are not highlighting in Rttyrite, then you need to set up Super
Check Partial:
https://www.rttycontesting.com/tutorials/writelog2/super-check-partial-setup/
Going further, when callsigns are highlighted, you can configure WriteLog so
all you have to do is hit the INSERT key and it will pull in the full
highlighted call to the Entry Window and send the contents of your exchange
message at the same time. Also, the + key on the keypad can be used to log
stations and send the confirmation message at the same time. These are called
"special accelerator" keys. See this page for details on how to set that up:
https://www.rttycontesting.com/tutorials/writelog/writelog-rtty-starter/page-10/
In order to add the special accelerator keys to the .ini file, you will need to
edit the .ini file. Check here if you are running WriteLog version 12:
https://www.rttycontesting.com/tutorials/writelog/version-12/#edit
In addition, you can program other keys to do these same functions as the
"special accelerator" keys by using keyboard shortcuts. For example, I program
the semicolon ; key to do the same thing as INSERT and program the apostrophe '
key to do the same thing as the plus key + on the keypad. To use keyboard
shortcuts, go here:
https://www.rttycontesting.com/tutorials/writelog2/keyboard-shortcuts/
Please note that the setup menu in WriteLog v12 has changed slightly. I haven't
updated the keyboard shortcut to reflect these changes yet.
Don AA5AU
-----Original Message-----
From: WriteLog [mailto:writelog-bounces@contesting.com] On Behalf Of Marty Bluhm
Sent: Saturday, February 23, 2019 8:17 PM
To: Writelog
Subject: [WriteLog] Touchy MouseCursor placement
Hi Guys,
This is the 2nd rtty contest in a row I’ve experienced this, so thought I
would ask the guru ‘s.
When clicking on an exchange (calls, state, number) window, if I don’t
click on the very first character,
The whole item does not get transferred to the qso entry window.
For example, if my cursor is on the 8 in W8AKS, the 8AKS is all that gets
transferred to the callsign field.
The same holds true for other exchange items.
I lost a few q’s until I realized what was happening and took time to make
sure the transfer was correct.
My question:do I have something setup wrong that it is this sensitive?
If so, where is it, so I can correct it.
Thanks and 73
Marty
W8AKS
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|