I tried to do what you want to do once and asked the same question and if I
recall correctly, you are correct, you can only key CW on one COM port.
You have to incorporate some sort of SO2R box to do CW on 2 radios I believe.
You can do SO2R (or SO3R, SO4R) on RTTY because the COM port for FSK is set in
Rttyrite and not the Ports screen.
For SO2R CW, I use two separate PCs. Since I already use separate PCs for SO2R
RTTY, it's not a major issue to do it on CW. I would prefer to do SO2R CW on a
single PC but I am not that much into it where I am going to purchase more
hardware to do it.
Don AA5AU
On Monday, May 27, 2019, 8:59:32 PM CDT, Rich <rwnewbould@comcast.net>
wrote:
As far as I can tell you can only assign one Comport # to key CW via PC
Generates in WL. I am curious if there is a way use two radios and one
PC and have WL key either radio?
Example:
Radio 1 on Comport 1
Radio 2 on Comport 2
I can only check one CW box in the Ports setup.
I do not believe this is possible, but figured I would ask to see if I
am missing something.
Rich
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|