Right-click instead of left-click the CQ station. This from the Read Me
file:
"Starting a QSO by answering a CQ message is the only way that DigiRite puts
its QSO's transmit frequency on the other station's RX frequency. In all
other cases, DigiRite chooses its own TX frequency. When answering a CQ, you
may force DigiRite onto its own TX frequency for that QSO by using a right
mouse click instead of a left click."
Don AA5AU
-----Original Message-----
From: WriteLog [mailto:writelog-bounces@contesting.com] On Behalf Of Ron
Lodewyck
Sent: Friday, August 9, 2019 4:51 PM
To: Writelog
Subject: [WriteLog] DigiRite TX Frequency
Just got DigiRite up and running and tried answering - unsuccessfully - a
couple of CQs. I want to click on a CQer and transmit on my own fixed
frequency. But, apparently, DigiRite always transmits on the CQers
frequency, unless I right click on the QSOs in Progress window and deselect
Transmit on RX frequency. This is awkward and there isn't enough time to
do that before I start transmitting.
In WSJT-X there is a check box to Hold TX Frequency. Is there some similar
default setting in DigiRite?
Thanks and GL in WW Digi Practice tonight at 0200.
73,
Ron N6EE
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|