I started playing with the simulator this evening. It is an amazing piece
of programming work and would be helpful for anyone wanting to get warmed up
before a contest.
I am trying to practice for 2BSIQ mode (alternating CQ/running on two
bands). It doesn't always give two continuous streams of callers. I seem
to work one on radio 1 with nothing on radio 2, and then vice versa. Not
sure if my QSL message is not right, but it is like the simulator doesn't
know I finished a QSO (or know that I am ready for the next one).
After about 15 minutes of running, I stopped having any new callers. The
automation is doing the alternate CQs, but no one calls me. Did I run out
of people to work, or did something break?
I stopped dual CQ and just called CQ on one radio. Still no answers. If I
tune around, I can hear other sims calling CQ.
It's almost like there is a time limit or a QSO limit on the simulator.
My CQ: cq test ak1w
My TU: tu ak1w
Randy K5ZD
-----Original Message-----
From: WriteLog <writelog-bounces@contesting.com> On Behalf Of Tom Georgens
Sent: Tuesday, May 5, 2020 9:56 PM
To: 'Ken Claerbout' <kenk4zw@gmail.com>; writelog@contesting.com
Subject: Re: [WriteLog] Contest Simulator SO2R
Ken
In the "RunMode settings" window you need to check "Dynamic Headphone
split." It will put both headphones on the radio not transmitting and split
them if neither is transmitting.
To get the settings window to open, you need to create a keyboard shortcut
for "External: Setup" just like what you need to start and stop
2RadioRunMode
GL Tom W2SC
-----Original Message-----
From: WriteLog <writelog-bounces@contesting.com> On Behalf Of Ken Claerbout
Sent: Tuesday, May 5, 2020 5:47 PM
To: writelog@contesting.com
Subject: [WriteLog] Contest Simulator SO2R
Hi Gang - struggling a bit and thought I would throw this out on the
reflector.
I'm trying to get SO2R working with the simulator, using the headphone latch
(CTRL X) function. I've used it for years during real contests.
On the simulator, I have each radio working independently, able to run on
either radio. When I engage CTRL X for latch, I continue to get sidetone
from the run radio. I don't hear the S&P radio when the run radio is
transmitting for example. It doesn't matter which of the two radios I'm
using for run or S&P.
CW Keyer type and SO2R Control are set for WinKey+ORSTP Pipes.
What am I missing?
73
Ken K4ZW
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|