Re: [WriteLog] CW Jitters

["Joe Subich, W4TV" <lists@subich.com>]

As documented in the example configurations for microKEYER,
microKEYER II, CW Keyer, and DigiKeyer II, the CW choice is
K1EL WinKeyer.  The example configurations have been available
for more than 10 years (or since the particular interface
was first introduced whichever is more recent).

The example configurations are available in Support area
(www.microham-usa.com/Support.html) of the microHAM-USA
web site.

The example configurations are also available within Router
(Help -> Download Documents).

73,

   ... Joe, W4TV


On 2020-08-02 6:36 PM, rgarrett5@comcast.net wrote:
> Hello Robert  et al,
>
>   
>
> So under “CW” in the configuration section, I have 8 choices.  The only MicroHam 
> setting is for MKR which is used with SO2R.  I’m a visually impaired guy so if there is 
> another place on the screen where Microham MKII is listed, please tell me.  I certainly am not able 
> to read it.
>
>   
>
> The only other setting for CW is the five choices I assume for LPT and com 
> ports.  Any input appreciated.  73, Bob K3UL
>
>   
>
> From: Robert <woodr90@gmail.com>
> Sent: Sunday, August 2, 2020 4:43 PM
> To: rgarrett5@comcast.net
> Subject: RE: [WriteLog] CW Jitters
>
>   
>
> FWIW
>
>   
>
> I’m hooking up winkey2 this month
>
>   
>
> have used the PC generated CW in past – normally it works great but think RF 
> got computer few times on that transistor interface
>
> and it would jitter & quit.  then reboot…
>
>   
>
>   
>
> check the writelog settings, if you’re got Microham 2 set in CW window, then 
> it’s a mystery to me
>
> My only experience with Microham was at Carl’s rental, the P40YL side had MicroHam, 
> Most – including me, unhooked it and used USB to RS232 or whatever instead then hooked 
> back up as was.
>
>   
>
> 73 W5AJ
>
>   
>
> Robert
>
> Midland, Texas
>
>   
>
> From: rgarrett5@comcast.net <mailto:rgarrett5@comcast.net>  
> [mailto:rgarrett5@comcast.net]
> Sent: Sunday, August 02, 2020 1:24 PM
> To: 'Robert' <woodr90@gmail.com <mailto:woodr90@gmail.com> >
> Subject: RE: [WriteLog] CW Jitters
>
>   
>
> Hello Robert,
>
>   
>
> MicroHam MKII.
>
>   
>
> I just want to be sure I don’t have some incorrect setting where I believe I’m using 
> the WINKEYER in the MicroHam MKII when I’m not and actually using PC generated CW..
>
>   
>
> From: Robert <woodr90@gmail.com <mailto:woodr90@gmail.com> >
> Sent: Sunday, August 2, 2020 2:04 PM
> To: Bob Garrett <rgarrett5@comcast.net <mailto:rgarrett5@comcast.net> >
> Subject: Re: [WriteLog] CW Jitters
>
>   
>
> How are you interfacing from writelog/computer to Rig on CW?
>
>   
>
> PC generate?
>
> Winkeyer?
>
> Etc?
>
>   
>
> W5AJ
>
>   
>
> On Sun, Aug 2, 2020, 7:10 AM <rgarrett5@comcast.net <mailto:rgarrett5@comcast.net> 
> > wrote:
>
> Greetings,
>
> I've had an ongoing problem using WriteLog with CW breaking up or having some 
> delays, speeding up or slowing down, mostly speeding
> up in the middle of a message.  Any thoughts as to why this behavior?  73, Bob 
> K3UL

_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/