Someone learned a lesson... Which is.... NOT to perform a software
upgrade of a perfectly working piece of equipment right before a big
contest.
Sorry for your difficulties. I can't offer more. Sorry.
Thanks
73
Jim W7RY
On 1/3/2021 3:23 PM, Courtney Judd wrote:
This week end turned into a really head scratcher for me. First I am
using FTdx5000MP, KPA-1500, microHam Keyer2 with software being
general logging=DX4WIN(9.0.9.1259)+MMTTY, contesting=
Writelog(12.44)+MMTTY, router (9.3.4) and WIN 10 pro. This combination
worked flawlessly up to Friday when I saw that Elecraft did a firmware
update for the KPA1500 to Ver 2.48 which I did.... what possibly could
go wrong... yeah! Everything works as it should with DX4WIN but
Saturday I started the contest with Writelog and that's when I
discovered the amp no longer wanted to follow the rig. I went thru
everything in Writelog and the menu in the KPA1500. But when I change
bands by button push on the 5000 the amp starts flipping back and
forth. In Writelog PORTS menu I unchecked POLL for the rig and that
seemed to help but then the rig no longer changed freq with the dial.
Just couldn't sort this out so closed Writelog and opened DX4WIn....
everything works like normal.... amp follows rig as usual.... went
back to Writelog and same problem. There is no difference in the
Router software for either program so what is different? Any
ideas/suggestions? Thanks and 73's Cort K4WI
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|