Thanks!
I haven't used 2T for several years. I tried the 64 version and it came up
OK after i remembered to uncheck the -C box
TX did not function. I can send text to RR OK from the F keys, but 2T only
transmits 3-5 diddles and stops. I'm set up for FSK, not AFSK. MMTTY works
fine. I must have some setup wrong somewhere. I don't do RTTY very often..
Anyway, it seems to copy OK although today there was a definite lack of FSK
signals on the air. So, as a secondary decoder (clone), it works fine. I
missed the XE RTTY contest earlier. That would have been a good test.
73, Alan AD6E
>
> Date: Sun, 7 Feb 2021 18:49:25 -0500
> From: "Joe Subich, W4TV" <lists@subich.com>
> To: writelog@contesting.com
> Subject: Re: [WriteLog] Fwd: 2Tone Update
> Message-ID: <ed6080d0-c1e9-7366-a1fe-42fe7497c00c@subich.com>
> Content-Type: text/plain; charset=utf-8; format=flowed
>
>
> I've not tried it with WriteLog yet but with DXLab Suite it is
> only necessary to copy the new 2Tone64.exe into the WinWaarbler
> directory, delete or rename the existing 2Tone.exe, and rename
> 2Tone64.exe to 2Tone.exe. Note: this was tested with 21.02a not
> the original 21.02.
>
> 73,
>
> ... Joe, W4TV
>
> ************
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|