WriteLog
[Top] [All Lists]

Re: [WriteLog] Digirite from Radio 3 Entry Window

To: <WriteLog@contesting.com>
Subject: Re: [WriteLog] Digirite from Radio 3 Entry Window
From: <k3sk@buckwalter.co>
Date: Thu, 19 Jan 2023 13:25:22 -0500
List-post: <mailto:writelog@contesting.com>
I just completed the update to Writelog v12.69 and the same issue exists.  I
am not able to get Digirite to work from the Radio 3 entry window.   

BTW --  Just in case it affects the issue this is when using the ARRL VHF
Sweepstakes contest module.    I haven't tried any other contest modules.

de K3SK

-----Original Message-----
From: WriteLog <writelog-bounces@contesting.com> On Behalf Of
k3sk@buckwalter.co
Sent: Wednesday, January 18, 2023 4:20 PM
To: WriteLog@contesting.com
Subject: [WriteLog] Digirite from Radio 3 Entry Window

Help !!!

I think I found a bug in v 12.68H

I?m setting up Writelog for the VHF Sweepstakes this weekend and I can?t get
Digirite to work from the Radio #3 Log Entry window.    I normally use 3 or
more radios for VHF/UHF contests.  This is the main reason I?ve used
Writelog for years, as it is always easy to setup and work multiple radios.
  This past September VHF Contest was the first time I worked a VHF/UHF
contest using digital modes and I was able to have Digirite work well from
the 3 Log Entry windows I used.   It was great and I was happy.

Fast forward to now ??.   I set up Writelog for 3 radios as usual.  

Radio  R  -   Yaesue FT-2000  for 6 meters Radio  L   -   ICOM IC-9700 for
2m, 70cm & 1296 Radio  3   -   ICOM IC-375A for 222

All of the radios interface correctly, and work as expected for logging
frequency & mode info and callsign/exchange entered in the Logging window. 

When I open Digirite, it works fine with the FT-2000 on Radio R and IC9700
on Radio L.  For the IC-375A on Radio 3, I get a ?failed to open wave
input?.   I have attempted many different settings with the Writelog sound
board setup and the little that can be changed in Digirite setup and still
can?t get it working.

If I set up for 4 Radios and put the IC-375A (or any of the others) in Radio
4 and set Radio 3 to ?manual? and not use it Digirite works fine from Radio
4.

I have the latest Writelog v12.68H and Digirite v2.2.2.11 versions installed
on Windows 11. 

This worked before with only 3 Radio windows open, but not now.  Any
suggestions?   

de K3SK
Dave Buckwalter
FM07 ? Farmville VA


_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

<Prev in Thread] Current Thread [Next in Thread>